In order to properly insulate the shed, I needed to add some framing to allow for enough insulation and venting of the roof. As the roof was framed with 2x4s, I ended up adding some 2x2s to bump that out to 2x6s (actually 5" deep), to allow for spacing for the soffit vents and insulation in the roof space.
I also had to add some additional framing to match the arc of the ceiling so that I eventually had something to nail/screw into when it came to adding the finish walls/ceiling to the interior of the shed.
 |
| A before shot of the roof 2x4 rafters. |
 |
| The added 2x2s to give enough depth at the sides. |
 |
| Skylight needs some framing work... |
 |
| Added an angled-cut 2x4 to fill in the gap. |
There's a side-by-side before and after of the framing needed, otherwise there would be nothing to attach the ceiling panels to on the right side.
 |
| Soffit vent panel added, and a view of the holes drilled for ventilation. |
No comments:
Post a Comment